1 single phase 3.0 amps. glass passivated bridge rectifiers voltage range 50 to 1000 volts current 3.0 amperes ideal for printed circuit boards reliable low cost construction technique results in inexpensive product high temperature soldering guaranteed: 260 / 10 seconds ul recognized file number: e347214 case: molded plastic lead: solder plated polarity: as marked on body mounting torque: 0.8n m recommended torque: 0.5n m maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number d3ub 05 d3ub 10 d3ub 20 d3ub 40 d3ub 60 d3ub 80 d3ub 100 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward t c = 100 rectified current at t a = 40 i f ( av) 3.0 (1) 2.0 (2) a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 60 a maximum instantaneous forward voltage @ 3a v f 1.1 v rating for fusing (3ms t<8.3ms) tj=25 i 2 t 15 a 2 sec maximum dc reverse current @ t a =25 rated dc blocking voltage per leg t a = 125 i r 5.0 500 a typical thermal resistance (note) r ja r jl 40 15 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 note 1. unit case mounted on 1.6*1.6*0.06? thick (5.1*5.1*0.15cm) al.plate 2. unit mounted on p.c.b. with 0.5*0.5? (12.7*1.27mm) copper pads and 0.375? (9.5mm) lead length d3ub05 thru d3ub100 features package: d3k website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 mechanical data dimensions in inches and (millimeters)
2 rating and characteristic curves d3ub05 thru d3ub100 note: specifications are subject to change without notice. fig. 1-maximum nono-repetitive forward surge current per bridge elelment fig. 2-maximum forward current derating curve number of cycles at 60hz ambient temperature.( ) fig. 3-typical instantaneous forward characteristics per bridge element fig. 4-typical reverse characteristics per bridge element instantaneous forward voltage.(v) percent of rated peak reverse voltage.(%) d3ub05 thru d3ub100 website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099
|
